High voltage cable branch box

Key words:

People's Power

Transformer

Substation

Power equipment

Product Advisory:

Product Description

Overview

The shell material is made entirely of stainless steel or cold-rolled plate. The surface of the steel plate is spray-coated, with a thickness of 2mm, providing strong corrosion resistance and mechanical strength. The top cover has an air sandwich structure and is equipped with ventilation holes. The air intake is located at the lower part of the box, hidden under the eaves, allowing for top-down convection airflow. The bottom of the box has a removable partition, with cable entry and exit holes to prevent small animals from entering, ensuring good thermal insulation and ventilation effects.

 

Structural Features

The switch cabinet body contains original imported or domestically produced SF6 insulated three-position load switches. The switch gas is fully sealed, requiring no heater, with no condensation issues and maintenance-free. There are no exposed live parts inside the cabinet, and the mechanical life of the load switch reaches 5000 operations. High voltage incoming and outgoing lines are connected through epoxy resin sleeves. Each compartment in the cable room is equipped with a set of three-phase live display indicators. A padlock device can lock the switch in any state.

 

Environmental Conditions

Altitude: 2000m;

Surrounding air temperature: upper limit +55℃, lower limit -45℃;

Relative humidity: daily average not exceeding 95%. Monthly average not exceeding 90%;

Surrounding air is not significantly polluted by corrosive gases or flammable gases, water vapor, etc.;

No frequent severe vibrations, earthquake intensity not exceeding 8 degrees;

 

Main Technical Parameters

Serial NumberItemParameter
1Rated Voltage (KV)12
2Rated Current (A)630
3Rated Frequency (HZ)50
4Partial Discharge (pc/13kv)≤10
5Rated Thermal Stability Current (ka/2s)20
6Rated Peak Current (KA)50
7Power Frequency Withstand Voltage (KV1min)48
8Lightning Impulse Withstand Voltage KV105
9Loop Resistance (uΩ)≤60
10Conductor Operating Temperature (℃)≤95
11DC Withstand Voltage (KV/15min)55
12Protection LevelIP33
13Applicable Cable TypesAC Polyethylene Cable
14Mechanical Life of Load Switch (times)5000
 

Related Products

7kW AC charging pile


The 7kW AC charging pile has a small size, exquisite appearance, and convenient installation. It uses a self-service operation, suitable for various parking locations that require AC charging. Users can independently complete charging, payment, and other operations, providing safe, reliable, stable, and efficient charging services for electric vehicles.

20kW/30kW DC charging pile


The 20kW/30kW DC charging pile has a small size, quick charging, and convenient installation. It uses a self-service operation and is suitable for various parking lots, residential areas, and shopping malls that require charging. Compared to AC charging piles, the charging speed is 3-5 times faster. Users can independently complete charging and payment operations, providing safe, reliable, stable, and efficient charging services for electric vehicles.

60kW DC charging equipment


The 60kW DC charger relies on advanced product design concepts and solid design technology to provide safe, economical, and convenient solutions for fast charging of electric vehicles. This product features a wide voltage range, modular design, intelligent control, precise measurement, diversified communication, and smart operation and maintenance.

Product Inquiry

Free product manuals can be obtained by leaving your contact information